Theoremson Kite Activity 16: Cute Kite Do the procedure below and answer the questions that follow. Materials: bond paper, pencil, ruler, protractor, compass, and straightedge Procedure: 1. Draw kite CUTE where UC ≅ UT and CE ≅ TE like what is shown at the right. Consider diagonals CT and UE that meet at X. C X T 2. Attachstring to the top-notch first by looping it around the stick. Proceed to the right side of the frame, then the bottom end doing the same. Proceed to the left side and then back to the end, wrapping the string on the notches. Avoid tightening the string too much that the sticks warp and bend. 2 Materials • Paper, scissors, a hole maker, 2 sticks, string and strips of paper (optional) 3. Get the piece of paper and cut a diamond shape from it. 4. With the string tie the two sticks together, it has to be as tight as possible. 5. Then you make 2 holes in the paper. On the inside corner where the two sticks cross, thread a thick string. Heres how the experiment worked: Franklin constructed a simple kite and attached a wire to the top of it to act as a lightning rod. To the bottom of the kite he attached a hemp string, and to that he attached a silk string. Why both? The hemp, wetted by the rain, would conduct an electrical charge quickly. TheMBK Soft Sled. Construction time: about 3 hours. MBK Soft Sled. This design was inspired by the classic Pocket Sled, but has several small differences. That's not to mention some large ones: the different scale, materials, and construction methods. Here are the free step-by-step instructions. Step1. Sharpen the crease down the middle of a double-page sheet of newspaper and then open it. With your pencil, make a dot about a finger-width from the top of the page. Tony Cenicola/The New Howto Make kite with Plastic Bag / Kite Making Without ScotchTape and Glue 2020 / Flying Kite Test / Kite making with plastic bag at home 2020 / basics step VMFnEK.

how to make a kite procedure text